Networking | GPRS Aptitude Questions and Answers

Networking | GPRS Aptitude Questions and Answers: This section contains aptitude questions and answers on Networking | General Packet Radio Service (GPRS).
Submitted by Nidhi, on May 07, 2021

Networking GPRS Aptitude Questions and Answers

1) There are the following statements that are given below, which of them are correct about GPRS?

  1. The GRPS stands for General Packet Radio Service.
  2. The GPRS is a mobile data service used in mobile phones.
  3. It is a packet-switched network that can be used by multiple users to transmit data using the same transmission channel.
  4. GPRS is also known as GSM-IP.

Options:

  1. A and B
  2. A, B, and C
  3. B, C, and D
  4. A, B, C, and D

2) What is the full form of ETSI?

  1. European Telegraph Standard Institute
  2. European Telecommunications Standard Institute
  3. Eastern Telephonic Standard Institute
  4. European Telephonic Standard Institute

3) There are the following statements that are given below, which of them are correct statements about GPRS?

  1. GPRS provides consistent IP services.
  2. It provides wireless internet accesses over mobile phones.
  3. GPRS uses the same infrastructure for different air interfaces.
  4. GPRS is older technology; it does not use in the current scenario.

Options:

  1. A and B
  2. A, B, and C
  3. B, C, and D
  4. A, B, C, and D

4) There are the following statements that are given below, which of them are the correct benefits of GPRS?

  1. The data rate of GPRS is very high.
  2. It is used to maintain constant data and voice communication.
  3. The GPRS provides SMS and MMS services.
  4. None of the above

Options:

  1. A and B
  2. B, C, and D
  3. A, B, and C
  4. A, B, C, and D

5) What is the full form of GSM?

  1. Global System for Mobile
  2. Global Service for Mobile
  3. General Service for Mobile
  4. General System for Mobile


6) Which of the following are correct GSM network elements?

  1. Mobile Station
  2. BSC
  3. BTS
  4. GPRS server nodes

Options:

  1. A and B
  2. B, C, and D
  3. A, B, and C
  4. A, B, C, and D

7) What is the full form of BSC in GSM network?

  1. Base Service Communication
  2. Basic Service Communication
  3. Base System Controller
  4. Base Station Controller

8) Which of the following is responsible for allocating radio resources to the mobile calls?

  1. Mobile Station
  2. BSC
  3. BS
  4. None of the above

9) Which of the following are components of the GPRS support node?

  1. Gateway GPRS support node
  2. Subnet GPRS support node
  3. Serving GPRS support node
  4. All the above

Options:

  1. A and B
  2. A and C
  3. B and C
  4. D

10) What are the responsibilities of SGSN?

  1. Registration of mobiles in the network.
  2. SGSN is used for authenticating GPRS mobiles
  3. It is used to store routing information of GPRS mobile
  4. All of the above

Options:

  1. A and B
  2. A and C
  3. B and C
  4. D


11) Which protocol is used between the SGSN and GGSN?

  1. KTP
  2. NTP
  3. LTP
  4. GTP

12) Which of the following interface is used between the SGSN and GGSN?

  1. Gn interface
  2. Um interface
  3. Gb interface
  4. None of the above

13) Which of the following are key parameters for the service quality of GPRS?

  1. Throughput
  2. Delay
  3. Reliability
  4. All of the above

Options:

  1. A and B
  2. A and C
  3. B and C
  4. D

14) Which of the following GPRS class of terminal equipment is used to manage both packet data and voice simultaneously?

  1. Class A
  2. Class B
  3. Class C
  4. Class D

15) Which of the following are examples of terminal equipment GPRS class C?

  1. Embedded modules used in vending machines
  2. GPRS PCM/CIA cards
  3. Both
  4. None


16) Which of the following are the states of MS in the GPRS system?

  1. Idle state
  2. Active state
  3. Standby state
  4. All of the above

Options:

  1. A and B
  2. A and C
  3. B and C
  4. D

17) Which of the following are the processes of the GPRS network?

  1. Attach Process
  2. Detach Process
  3. Authentication process
  4. PDP activation process

Options:

  1. A and B
  2. A, B, and C
  3. B, C, and D
  4. A, B, C, and D

18) What is the full form of UMTS?

  1. Universal Mobile Telecommunication System
  2. Unique Mobile Telecommunication System
  3. Unique Mobile Transfer System
  4. Universal Mobile Transfer System

19) Which of the following parameters are used for GPRS billing?

  1. Amount of data transferred
  2. Free of charge
  3. Flat monthly rate
  4. Quality of service

Options:

  1. A and B
  2. A, B, and C
  3. B, C, and D
  4. A, B, C, and D

20) What is the full form of BSS?

  1. Base Station Subsystem
  2. Base Service Station
  3. Base System Services
  4. Basic System Services

Comments and Discussions!

Load comments ↻





Copyright © 2024 www.includehelp.com. All rights reserved.